To main content

Micro Cut & Finish P2.02

Micro polishing compound with carnauba wax

Micro Cut & Finish 2.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish 2.02 is economical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 2,5; Gloss: 9,5
Micro Cut & Finish P2.02

LackbehandlungMore about the product system

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

Micro Cut & Finish P2.02

Container

  • Sell-off 1 LArticle No. 315001
  • Sell-off 0,25 LArticle No. 315250

Downloads

Paintwork of cars, commercial vehicles, motor cycles, etc.

Recommendations for use

For optimum results we recommend using our orange anti-hologram pad and an orbital polisher with forced rotation (eg Makita BO 6040, highest speed). Alternatively a rotary polisher can be used in combination with our orange anti-hologram pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure thoroughly. Afterwards polish wit low pressure. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.

Shake before using.;Protect against frost and excessive heat.;Before using, check suitability and compatibility.;Do not use on hot surfaces.;Safety data sheet available on request for trade users.;