To main content

PerfectFinish Sealant

Spray sealant for a high-gloss surface

PerfectFinish Sealant is an efficient spray sealant for the long-lasting protection of vehicle paint surfaces. The treated surface is given a high-gloss finish. PerfectFinish Sealant can be used as a stand-alone sealant. Due to its strong hydrophobicity, it is suitable as a topping for an existing ceramic coating. Follow-up vehicle washes are simplified by the easy-to-clean effect. Easy to use with a pleasant fruity fragrance.
PerfectFinish Sealant

LackbehandlungMore about the product system

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

PerfectFinish Sealant

Container

  • 5 LArticle No. 685005
  • Article No. 685088
  • 10 STKArticle No. 685500

Downloads

Painted surfaces on cars, commercial vehicles, motorcycles, etc.

Recommendations for use

Pre-clean/wash the vehicle according to how dirty it is and dry thoroughly. Depending on the condition of the paintwork, treat the surface with a silicone-free polish and then degrease with Panel Preparation Spray. Spray PerfectFinish Sealant onto a clean Polish & Sealing Towel and spread evenly over contiguous areas. Finally, remove the residue with a dry Polish & Sealing Towel. Do not spray directly onto painted surfaces. Alternatively, the product can be applied by machine. To do this, apply PerfectFinish Sealant to a Polish & Sealing Foam Pad and work it into the vehicle paintwork in sections using a compressed air eccentric or eccentric polishing machine. Finally, remove the residue with a dry Polish & Sealing Towel. After applying PerfectFinish Sealant, the vehicle must not be washed again within 24 hours.

Do not apply to heated surfaces or allow to dry. Do not use in the sun. Protect from frost. Shake before use. Check for suitability and compatibility before use. Do not use below 10 degrees ambient temperature.