Heavy Cut H9.02

Coarse polishing compound, silicone-oil-free

Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.02 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof). Abrasion level: 9,0 Gloss level: 6,0

LackbehandlungMore about the product system

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

Heavy Cut H9.02 Watch video

Areas of use

Paint on cars, commercial vehicles, motorcycles, etc.

Recommendations for use

Apply in a crosswise motion with a rotary polisher and a lambskin pad (for sanding traces of 1,200–2,500) or the Heavy Cut Pad (for sanding traces of 1,500–3,000). Apply polishing compound at medium speed and with medium pressure. Polish afterwards with Micro Cut M3.02 or Micro Cut & Finish P3.01 for the best possible finish.

Warnings

Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Safety data sheet available on request for trade users. Protect against frost and excessive heat.

Suitable products for your selection.

Exzenterpolierer Flex XFE 7-15 150

The Flex XFE 7-15 150 is an eccentric polishing machine for the professional vehicle refurbisher or painter. The polisher has a power of 420…

You might also be interested
in these products.

Micro Cut M3.02

Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding…

Ceramic Allround C0.02

Ceramic Allround C0.02 is a ceramic coating which can be used on a variety of surfaces to provide long-lasting protection. The very thin…