To main content

Flex PXE 80 10.8-EC/2.5 Set

The Flex PXE 80 is the ideal complementary device for every vehicle refurbisher, painter and the spot repair sector. Flexible and easy as never before from flower sanding to hologram-free finishing with one unit. It is ideally suited for rotary and eccentric free-running work with 3 and 12 mm strokes. It has an innovative, tool-free quick-change system for exchanging the rotary and eccentric drive types. The Flex PXE 80 is equipped with a damped special Velcro pad for polishing and grinding. The ergonomic and flexible grip options thanks to the optimally placed SoftGrip surfaces allow the device to fit perfectly in the hand. Other advantages: - Throttle switch for a slow and sensitive start and lock for continuous running. - High running smoothness due to vibration optimization - With impact protection ring to protect surfaces - Brushless motor with higher efficiency and longer service life - Electronic Management System (EMS) protects the machine, extends service life and increases efficiency - LED battery capacity indicator - FLEX battery system: operation with all 10.8 V battery packs

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

Flex PXE 80 10.8-EC/2.5 Set

Container

  • 1 pceArticle No. 999594

Downloads

The polishing machine is designed - for use in vehicle preparation, paint shops, industry and crafts, - for all kinds of polishing work with polishing sponges or lambskin pads. - For sanding work with Velcro sandpaper, - For use with tools that may be operated at a speed of at least 5800 1/min.

Suitable products for your selection.

Fine Cut Pad

Fine Cut Pad

Medium abrasive sponge for removing moderate weathering and scratches using the Fine Cut F6.01. The short height of 23mm creates low torsion…

Fine Cut Pad
Makita Rotationsexzenter PO5000C

Makita Rotationsexzenter PO5000C

The powerful, extremely smooth-running eccentric polisher with constant electronic speed control for consistent speed even at high loads.…

Makita Rotationsexzenter PO5000C
Micro Cut Pad

Micro Cut Pad

High-quality special sponge for removing fine scratches, holograms and polishing marks using the Micro Cut M3.02 and Micro Cut & Finish…

Micro Cut Pad

You might also be interested
in these products.

Micro Cut & Finish P3.01

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding…

Micro Cut & Finish P3.01
One Cut & Finish P6.01

One Cut & Finish P6.01

High-gloss Polish with Sealant

Innovative machine polish for quickly producing high-gloss surfaces and for effectively removing scratches and grindings from a grit size of…

One Cut & Finish P6.01