Gelcoat Micro Cut & Finish
Finish polishing compound for gelcoats and boat paints
Machine polish for slightly weathered and matted gelcoats and boat paints for the permanent removal of polishing haze, holograms and scratches. At the same time, Gelcoat Micro Cut & Finish offers a brilliant and durable high-gloss finish even on dark and similarly sensitive colors under extreme light conditions thanks to its special abrasive particles. Thanks to the carnauba wax it contains, no separate sealing of the surface is necessary. High yield, easy to polish and easy to wipe off. Contains silicone.
Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.
Container
- 1 LArticle No. 498001
Downloads
- Product Information English |
- Safety Data Sheet English |
For the permanent removal of polishing haze, holograms and fine scratches on gelcoats and boat paints with simultaneous sealing.
Can be applied using an eccentric polishing machine. Spread 5 pea-sized drops on a suitable polishing pad (Micro Cut Pad hard) and work in a crosswise motion. Spread the product on the surface at low speed and then process at the highest speed. Buff out the polish and remove any remaining polish with a Polish & Sealing Towel. Subsequent sealing is not necessary due to the wax components contained in the product.
Shake before use. Check for suitability and compatibility before use. Do not use on hot surfaces. Protect from frost and excessive heat. Do not use on unpainted plastics and rubber.
