Gelcoat One Cut
High-gloss polishing compound with sealant for gelcoats and boat paints
1-step machine polish for all gelcoat and boat paint colors for the permanent removal of polishing haze, holograms and scratches with a simultaneous sealing effect. Gelcoat One Cut is economical, easy to polish and easy to wipe off and therefore has an optimum ratio of abrasiveness and gloss for economical and effective work in marine refinishing. In addition, the polish produces a brilliant and durable high-gloss finish even on difficult, dark colors. Contains carnauba wax and non-volatile silicones and thus protects against chalking and weathering.
Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.
Container
- 1 LArticle No. 509001
Downloads
- Product Information English |
- Safety Data Sheet English |
Removal of polishing haze, holograms and scratches with a simultaneous sealing effect on gelcoats and boat paints
Can be applied using an eccentric polishing machine. Spread 5 pea-sized drops on a suitable polishing pad (Micro Cut Pad hard) and work in a crosswise motion. Spread the product on the surface at low speed and then process at the highest speed. Buff out the polish and remove any remaining polish with a Polish & Sealing Towel. Subsequent sealing is not necessary due to the wax components contained in the product.
Shake before use. Check for material compatibility before use. Do not use on hot surfaces. Protect from frost and excessive heat. Do not use on unpainted plastics and rubber.