Lambswool Pad short

Extra dense and tug-resistant natural lambskin pad short pile for processing abrasive polishes for eccentric polishing machines. Lambskin is the polishing medium with the highest abrasiveness. Ideally suited for removing heavy weathering, deep scratches and abraded surfaces. Abrasiveness: 9

ZubehörMore about the product system

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

Container

Ø 126 mm Article No. 9998213
Ø 150 mm Article No. 9998214

Downloads

Product Information English |

Areas of use

Heavily weathered, scratched and abraded paint.

Recommendations for use

Especially suitable for processing the Heavy Cut (H9.02). To generate an optimal and smooth running behavior on the paint surface, the polish must be worked into the fur once.

Warnings

Only brush out the Lamswool Pad short after use. Do not wash in the washing machine. Follow the care instructions.

Suitable products for your selection.

Polish and Sealing Towel

The chain-seamless, undisputed No. 1 among microfibre cloths with two differently structured sides. During ultrasonic cutting, the fibres…

Exzenterpolierer Flex XFE 7-15 150

The Flex XFE 7-15 150 is an eccentric polishing machine for the professional vehicle refurbisher or painter. The polisher has a power of 420…

Heavy Cut H9.02

Coarse polishing compound, silicone-oil-free

Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint…

You might also be interested
in these products.

Heavy Cut Pad

Abrasive sponge for removing strong weathering and deep scratches using the Heavy Cut H9.01. The short height of 23mm creates low torsion…

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding…

One Cut Pad

Medium abrasive sponge for removing moderate weathering and scratches using the One Cut and Finish P6.01. The short height of 23mm creates…