One Cut & Finish P6.02

High gloss polish with Sealant

The One Cut & Finish P6.02 is a machine polish for the permanent removal of polishing haze, holograms and scratches as well as sanding from grit P 2000 with a simultaneous sealing effect. A brilliant and durable high-gloss finish is created through the use of homogeneous abrasives. The innovative One Cut & Finish P6.02 combines an optimal ratio of abrasiveness and gloss for economical and effective work in vehicle preparation. The One Cut & Finish P6.02 is economical, easy to polish and easy to wipe off. Contains carnauba wax and non-volatile silicones. Grinding level: 6.0 Gloss level: 8.0

LackbehandlungMore about the product system

Information on which containers of the product are consumer compliant is available upon request. This product may not be available in every region.

One Cut & Finish P6.02 Watch video

Areas of use

Paints on cars, commercial vehicles, motorcycles, etc.

Recommendations for use

To achieve optimal results, we recommend processing with our One Cut Pad and a high-performance eccentric (min. 15 mm stroke) or with an eccentric with forced rotation. For optimal dosing, spread five pea-sized drops evenly on the pad. Distribute the polish evenly over the surface with the machine at the lowest speed and then polish crosswise with medium pressure. Do not alternate the sponges used for this product with other products. For the scratch-free removal of polish residues, we recommend our ultrasonically cut Polish & Sealing Towel.

Warnings

Shake before use. Check for suitability and compatibility before use. Do not apply to hot surfaces. Protect from frost and excessive heat. Do not use on painted plastics and rubber.

Suitable products for your selection.

Makita Rotationsexzenter PO5000C

The powerful, extremely smooth-running eccentric polisher with constant electronic speed control for consistent speed even at high loads.…

Exzenterpolierer Flex XFE 7-15 150

The Flex XFE 7-15 150 is an eccentric polishing machine for the professional vehicle refurbisher or painter. The polisher has a power of 420…

One Cut Pad

Medium abrasive sponge for removing moderate weathering and scratches using the One Cut and Finish P6.01. The short height of 23mm creates…

You might also be interested
in these products.

Micro Cut & Finish P3.01

Micro polishing compound with carnauba wax

Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding…

Micro Cut M3.02

Micro polishing compound, silicone-oil-free

Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding…